What surfaces does it hold on?

Metal, painted surfaces, rigid plastic and timber, provided they're clean and dry. Dust, oil and moisture all weaken the bond, so clean the surface first.

Do you slit to strip?

Yes. It's slit to the width and length you specify, arriving ready-sized for gasket work.

How much does it compress?

Compression depends on foam density and the pressure applied. Send your gap dimension and we'll recommend a thickness allowing for it.

Product Form

Self-Adhesive Foam

Self-adhesive foam provides fast and clean installation without the need for separate glue, thanks to the adhesive layer on one face. In sealing, vibration isolation and surface protection applications it saves time — simply peel the protective film and press it into place. It is a practical taping solution that seats neatly along the edges of covers, panels and enclosures.

Product family: Foam Sponge

Key Properties

Single-sided adhesive layer
Glue-free fast installation
Peel-off protective film
Sealing and insulation
Cover and panel edges
Clean and practical application

Request Quote

Overview

Self-adhesive foam is polyurethane foam with an adhesive layer on one face. Peel the liner, press it to the surface and it's mounted — no separate adhesive, no cure time, no squeeze-out to clean.

Typical use

Lid and enclosure gaskets, vibration damping pads, noise-reducing linings and machine panel insulation are the commonest applications. Because it stays where it's placed, it shortens labour time on an assembly line.

Adhesive and surface

A general-purpose acrylic adhesive suits most clean, flat surfaces. Rough surfaces, low-surface-energy plastics and heat-exposed locations use stronger formulations. Tell us the surface and it's produced with the right tape.

Choosing thickness

Thin strips suit gaskets and sealing; thicker pads suit vibration and noise damping. Where gap-filling is the job, allow for how much thickness the foam loses under compression.

Applications

Lid and enclosure gaskets
Vibration damping pads
Machine panel insulation
Noise-reducing linings
Electrical cabinet sealing
Automotive interior trim
Appliance body joints
Gap filling and packing

Technical Data

Material: Polyurethane foam, one side self-adhesive
Adhesive: Acrylic; high-tack to order
Form: Sheet, strip, roll, die-cut
Thickness: 3 mm – 50 mm
Colour: Anthracite, grey, white
Application: Peel the liner, press to the surface

Frequently Asked Questions

What surfaces does it hold on?: Metal, painted surfaces, rigid plastic and timber, provided they're clean and dry. Dust, oil and moisture all weaken the bond, so clean the surface first.
Do you slit to strip?: Yes. It's slit to the width and length you specify, arriving ready-sized for gasket work.
How much does it compress?: Compression depends on foam density and the pressure applied. Send your gap dimension and we'll recommend a thickness allowing for it.

This form is made to order — size, thickness and density are set by your requirement. Tell us about your product and our technical team will come back within 24 hours.

Cutting in This Material

We supply this as sheet, and cut to your product's dimensions.

Foam CuttingCutting to your product's dimensions in polyurethane foam, EVA, XPE and PE foam. One process from measurement to sample to production.Explore EVA CuttingPrecision die-cutting in EVA foam. With its closed-cell structure, high impact absorption and clean cut edge, EVA is the most used material for product-specific cavities.Explore In-Box Foam CuttingDesigning the inside of the box around the product: an interior where every part sits in its own cavity, doesn't move in transit, and looks right when opened.Explore Filter Foam CuttingOpen-cell foam cut to size for ventilation, dust capture and paint-booth filters — as sheet, roll or finished to the frame.Explore

Other Forms in This Family

The other production forms of the same material family.

Polyurethane Foam Sheet

The polyurethane foam sheet is a versatile material produced in standard thicknesses that forms the basis of in-pack padding and general protection applications. Thanks to its flexible structure it fits easily into the interior surfaces of boxes and cases, safely wrapping sensitive products against impact and vibration. Available in anthracite, grey and white, it adapts to a wide range of packaging and finishing needs.

Explore

Polyurethane Foam Separator

Die-cut foam is a professional protection solution shaped to millimetric precision according to your product's geometry, providing a dedicated cavity for each item. By keeping products fixed in place, it prevents shifting and collision during transport of electronics, medical and sensitive equipment. Multi-layer cuts deliver in-box organization and a premium unboxing experience.

Explore

Acoustic (Pyramid) Foam

Acoustic pyramid foam effectively reduces echo and noise by scattering sound waves through the pyramid profile on its surface. It offers an ideal solution for damping unwanted sound in studios, offices, generator cabins and machine enclosures. With its light and flexible structure it applies easily to walls and panels, noticeably improving acoustic comfort.

Explore

Flocked Jewellery Foam

Flocked jewellery foam presents rings, necklaces, watches and similar valuables scratch-free and elegantly, thanks to its velvet-textured flock coating. Die-cut slots sized to the product hold each piece securely; it is used for the interior layout of jewellery boxes, presentation boxes and corporate gift packaging. Produced to order in various colours, densities and sizes.

Explore

Egg-Crate Foam

Egg-crate foam is an economical polyurethane sheet whose profiled surface of peaks and valleys reduces echo, and which also serves as a cushioning face inside packaging.

Explore

Acoustic and Insulation Foam

Acoustic and insulation foam is a family of constructions: flat acoustic sheet, self-adhesive foam, film- or foil-faced sheet and heavy barrier composites. Which one is right depends on whether the problem is echo or sound transmission.

Explore

Foam Sponge