Guides on packaging and protection.
Technical articles on material selection, shipping, export standards and industry applications. (Currently in Turkish.)
EPDM or EVA? A Gasket and Material Selection Guide
EPDM, sponge EPDM, EVA foam and silicone compared on temperature, UV, sealing and cost — with a comparison table showing which gasket suits which job.
Read article
Absorption or Insulation? What Acoustic Foam Does and Does Not Do
Acoustic foam absorbs sound; it does not stop sound passing through a wall. The physics of the two problems, the role of geometry, and where to apply it.
Read article
Aluminium Carry Case or Wooden Crate? How to Choose
Choosing between an aluminium carry case and a wooden crate on weight, reuse, shipping type and budget.
Read article
How to Choose Gasket Material: EPDM, EVA and Rubber
Gasket choice depends less on the material than on the application: the medium, the compression, the cell structure and how flat the surface is.
Read articleContainer Sweat: Moisture and Corrosion in Sea Freight
How container rain forms, where the moisture actually comes from, why desiccant alone is not enough, and which materials do not belong in sea freight.
Read article
Choosing Protective Packaging for Electronics and Sensitive Devices
The principles behind packaging that protects electronics from impact, vibration, static and moisture.
Read articleESD Packaging: Antistatic, Dissipative and Conductive Materials
What the three ESD material classes actually do, why colour guarantees nothing, and which class a given product really needs.
Read article
EVA, XPE, PE Foam and Polyurethane Sponge: What's the Difference?
How EVA, XPE, PE foam and polyurethane sponge differ in structure and use — and which one suits which application.
Read articleWooden Export Packaging and the ISPM-15 Standard
The mandatory ISPM-15 heat-treatment standard for wooden pallets and crates in export, the IPPC stamp, and what customs expects.
Read article
How Stacking Load Is Calculated — and What Really Decides Box Strength
What the bottom box actually carries, why a safety margin is needed, how time and moisture erode strength, and how the pallet pattern changes the result.
Read article
Die-Cutting, CNC or Waterjet? How the Method Is Chosen
Quantity, geometry and edge quality decide between a steel-rule die, CNC and waterjet. Which suits which job — and which is simply unnecessary cost.
Read articleSingle-Wall or Double-Wall? The Logic Behind Choosing a Box
How corrugated board carries load, where single-wall is enough, when double-wall is genuinely needed, and why thicker board is not always stronger.
Read articlePresentation Box Interiors: Velvet or EVA?
Velvet boxes and custom interiors — how packaging adds to brand value for gift and corporate products.
Read articleFoam Tape in Automotive and Appliance Manufacturing
How foam tapes are used for sealing, vibration damping and sound insulation in automotive and white-goods production.
Read articleHow Custom Protective Packaging Is Designed: Measure, Design, Test, Deliver
The four-stage engineering process behind custom protective packaging: measurement, design, testing and delivery.
Read articleCommon Packaging Mistakes in Shipping — and How to Avoid Them
The usual causes of transit damage — void space, vibration, moisture and weak outer packaging — and the practical fixes for each.
Read article
Silicone and Sealant Types — Acetoxy, Neutral and Hybrid Compared
Acetoxy, neutral and hybrid silicones and sealants: which chemistry belongs on which surface and application.
Read article
How to Choose Stretch Film: Hand or Machine?
Practical notes on stretch film: hand versus machine application, micron and stretch ratio, wrapping technique and its protective role.
Read articleHow to Choose Foam Density
Why density is not hardness, how surface pressure decides the specification, and why higher density does not automatically mean better protection.
Read article